Slide Series · Made in Rotterdam

SlideUnder Elite (Macbook)

Built to last. Through summers, sunlight, and everything else.

The dock that disappears under your desk — now in our toughest material yet. SlideUnder Elite mounts flush beneath the desktop and lets your MacBook slide in and out in a single motion. No cable mess, no clutter on top, no compromise underneath.

Where Standard and Pro are printed in PLA, Elite is printed in carbon-fiber reinforced PETG-CF — engineered for desks that push boundaries.

Why Elite

  • Heat-stable to 80 °C. Holds its shape on sunlit desks and in warm rooms.
  • Stiffer under load. Carbon-fiber reinforcement means it won't sag or creep with your MacBook seated, day after day.
  • Daily-use tough. Higher impact resistance than PLA — it shrugs off reseating, knocks, and bumps.

Same precise fit. Same one-motion slide. Same full-power USB-C connection the moment it seats — up to 240 W of charging and 80 Gbps of bandwidth, ready to drive your displays and feed everything you plug in.

A note on bandwidth: the full 80 Gbps needs a MacBook with Thunderbolt 5 (M4 Pro and up). On models that top out at 40 Gbps, Elite simply runs at your machine's own maximum. Those models still benefit from Elite either way; the heat resistance and stiffness apply to every MacBook, whatever its port speed.

Machined tolerances down to ±0.05 mm, printed on demand in Rotterdam. Mount it once in about ten minutes with the included hardware, and forget it's there.

  • 5.0★Rating
  • 0–2 daysShips in
  • Free shippingOver €150
  • +500docks shipped
€129,99 In stock · ships in 48 h
Choose tier Standard €64,99+ 40 Gbps | 100W Recommended Pro €94,99+ 80 Gbps | 240W
ElitePETG-CF Carbon fibre reinforced
From €119,99

Built to last

  • Heat-stable to 80 °CHolds shape on sunlit desks and warm rooms.
  • Stiffer under loadCarbon-fiber reinforced - won't sag or creep with the MacBook seated.
  • Daily-use toughHigher impact resistance than PLA - survives reseating, knocks, and bumps.
up to €139,99
Color Carbon Fibre Black
Desk has a crossbar? SlideUnder Crossbar Elite (Macbook) · from €144,99 PETG-CF Carbon fibre reinforced

Buy 2 or more — save 5% automatically at checkout.

Engineered to disappear

Spec sheet
Power delivery
240 W Full 240 W with M4 Pro and up; earlier chips charge at 100 W
Bandwidth
80 Gbps Full 80 Gbps with M4 Pro and up; earlier chips run at 40 Gbps
Material
PETG-CF Carbon fibre reinforced
Dimensions
250 x 231 x 27 mm9.8 x 9.1 x 1.1 in · Without MacBook
Dimensions docked
333 x 231 x 27 mm13.1 x 9.1 x 1.1 in · With MacBook · Allow at least 5 cm (2 in) behind the dock for cables (without an angled adapter)Doesn't fit? Try the SlideUnder Crossbar Elite (Macbook) Or contact me for a custom fit

Pick the tier for your setup

Standard vs Pro
Standard Single-cable office, hot-desking
Pro Studio editing, dual external displays
EliteThis page Heat-stable, carbon-fiber reinforced
Bandwith40 Gbps80 Gbps80 Gbps
Power delivery100W240W240W
WashersNoYesYes
Enhanced airflowNoYesYes
Increased UV & heat resistanceNoNoYes
Desk in direct sunlightPLA softens from around 50 °C, which a dock sitting in direct sun can reach. Choose Elite for a sunlit desk.Not recommendedNot recommendedYes
MaterialElite in White uses Glass Fiber (GF); other colors Carbon Fiber (CF)PLAPLAPETG Carbon or Glass Fiber

Four screws. One cable. Done.

Install · a few minutes
01

Pick your spot

Align the A4 drilling template against the edge of the desk and punch/mark the four crosshair centres.

02

Mount it

Drill pilot holes. Screw the mount in with the included washers protecting the desk surface.

03

Plug in

Connect your USB-C cable to the built-in passthrough port. One cable, always ready.

04

Slide.

Slide the MacBook into the mount until the integrated port meets the laptop. That's it.

From customers

How buyers actually run it

Reviews

What customers say

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)

Frequently asked

Before you order

Will this fit my laptop?

The SlideUnder Pro is designed exclusively for MacBooks. It's available in two sizes: 14" (fits MacBook Pro 14") and 16" (fits MacBook Pro 16"). It does not fit MacBook Air models or non-Apple laptops.

How fast does it ship?

Orders ship from Rotterdam, Netherlands within 1–2 business days. Delivery within the Netherlands and Belgium typically takes 1–3 business days. European orders are usually delivered within 2–4 business days. International shipping (US, AU) takes 2–6 business days depending on the destination.

What's the return policy?

If you're not satisfied, you can return your SlideUnder Pro within 30 days of delivery. Contact support@dockedbydesign.com to arrange your return.

What material is it made from?

Each mount is 3D printed in-house in Rotterdam using high-quality matte PLA. Every unit is printed and quality-checked by hand before shipping.