80Gbps
Max Bandwidth
240W
Power Delivery
€94,99
Starting From
🇳🇱
Made in Netherlands
Why SlideEdge Pro?
The edge-mounted evolution — built for desks where under-mounting isn't possible, and for setups worth showing off.
Crossbar? No Problem.
Most under-desk mounts go in the centre — right where the crossbar is. SlideEdge mounts to the underside of your desk's edge, where there's nothing in the way.
Crossbar-friendlyShow It Off
Your MacBook sits at the edge of your desk, visible and within arm's reach. Slide it out in one motion. Clean desk, clean look — and a setup worth showing.
Display-worthyEasier Docking
The edge position makes sliding in and out more natural than reaching underneath. One smooth side motion and your MacBook is docked, charging, ready.
One-motion dock240W / 80Gbps Pro Power
Thunderbolt 5 ready. Charge at full 240W and push 80Gbps bandwidth — all through a single cable, every time you slide in.
TB4 / TB5 / USB4Precision Fit
Engineered specifically around MacBook Pro 14" geometry. Every millimeter measured — your laptop slides in smooth, holds firm, and releases cleanly.
Model-specificFuture-Proof
Fully backwards compatible with Thunderbolt 4. As your setup evolves, your mount stays relevant. Built for the next 5 years.
TB4 / TB5 / USB4Up and running in minutes
Three screws. One cable. Done. No specialist tools, no complex setup — just a clean desk edge.
1
Pick Your Spot
Hold the mount against the underside of your desk edge and mark the 3 screw holes with a pencil.
2
Mount It
Drill pilot holes, place the tall stability washers, then drive in the 3 screws. The washers ensure a rigid, wobble-free hold at the desk edge.
3
Plug In
Connect your USB-C cable to the built-in port. One cable — always ready.
4
Slide In
Slide your MacBook in from the side. Held secure at your desk edge, charging, always within reach.
Standard vs Pro — which is right for you?
Both mounts share the same edge-mount design. The Pro is built for those who need maximum bandwidth and power.
| Feature | Standard | ⚡ Pro (This one) |
|---|---|---|
| Max Bandwidth | 40Gbps | 80Gbps (TB5) |
| Power Delivery | 100W | 240W |
| MacBook Pro 14" M1–M5 | ✓ | ✓ |
| MacBook Air / Neo | ✓ | — |
| Thunderbolt 4 compatible | ✓ | ✓ |
| Thunderbolt 5 ready | — | ✓ |
| Reinforced frame | — | ✓ |
| Ventilation cutouts | ✓ | ✓ |
| Tall stability washers | ✓ | ✓ |
| Made in Netherlands | ✓ | ✓ |
| Price from | €69,99 | €94,99 |
Technical Specifications
Everything you need to know before you buy.
⚡ Performance
- Thunderbolt 5 compatible — up to 80Gbps
- Up to 240W power delivery
- TB4 compatible — unlocks full speed with TB5 machine
- Integrated USB-C docking port
- One-motion side slide-in docking
🖥️ Compatibility
- MacBook Pro 14" M1–M5 (2 variants)
- MacBook Pro only — requires TB port
- For Air, Neo → SlideEdge Standard
- Mounts to underside of desk edge
- Crossbar-friendly placement
🏗️ Materials & Build
- Reinforced unibody Bambu Lab PLA
- Ventilation cutouts for airflow
- Tall stability washers for rigid hold
- Lightweight yet extremely strong
- Reinforced geometry — increased rigidity
📦 In the Box
- SlideEdge Pro mount (model-specific)
- MagSafe 3 tool
- Mounting screws (×3)
- Tall stability washers (×3)
- Install guide included
Frequently asked questions
Still have questions? Contact us — usually replies within a few hours.
The SlideEdge Pro supports MacBook Pro 14" (M1–M5), available in two variants based on port position. Select your exact model from the variant picker above. If you have a MacBook Air or MacBook Neo, the SlideEdge Standard is the right choice.
Yes, that's exactly what SlideEdge is designed for. It mounts to the underside of your desk's edge — away from where most crossbars sit. As long as there's a few centimetres of clear space at the edge, you're good to go.
For full 80Gbps and 240W charging, you'll need a cable rated for that speed — either a Thunderbolt 5 certified cable or a high-speed USB4 Gen 3 cable (80Gbps). A standard USB-C cable won't cut it. We recommend our Low-Profile Angled USB-C Adapter (available as an add-on) for the cleanest cable exit angle out of the mount.
You'll need 3 small pilot holes in the underside of your desk edge — not visible during normal use. The included tall stability washers protect the surface and keep the mount rock solid.
Orders are printed on demand and dropped off with the carrier within 1–2 business days. Delivery then takes an additional 2–5 days on top of that. You'll receive a tracking link as soon as your order ships.
Yes — 14-day return policy, no questions asked. Just contact us and we'll sort it out.
Your desk is ready for this.
Mount it at the edge. Show it off. Dock in one motion — every single day.
✓ 14-day returns
✓ Ships in 1–2 days
✓ Made in Netherlands
✓ Precision fit